---
title: "Alternating layout"
description: "The Alternating layout block shows numbered items along a vertical line, with content alternating between the left and right sides. Use Alternating to add visual variety to a sequence, such as a story arc, a learning journey, or a set of milestones."
url: https://docs.createupon.ai/en/articles/10494082-alternating-layout
collection: "Layout"
updated: 2026-08-11
language: en
---

# Alternating layout

The Alternating layout block shows numbered items along a vertical line, with content alternating between the left and right sides. Use Alternating to add visual variety to a sequence, such as a story arc, a learning journey, or a set of milestones.

> **Info:** **Availability**: All customers

## What the Alternating layout does

On large screens, Alternating places a vertical line down the center of the block. Numbered badges sit on the line, and each item's content appears to the left or right in turn. The result is a zig-zag rhythm that draws the eye down the page.

On narrow screens, the layout shifts to a single column. The line moves to the left edge and all content sits to the right, so the sequence stays readable on small devices.

Alternating works well for:

• a story arc or narrative sequence

• a learning journey with distinct phases

• before-and-after or problem-and-solution pairs

• milestones where visual variety helps engagement

![](https://staticfiles.gleap.io/gattachments/JN0JPvaYrQf9qvlPq1fKKmXGXm2bCfGhYCobLgf8QJEYj9nEnAX0cGkoGEydYEGLoYeWRHHsq3L.png)

## Insert an Alternating block

You can add an Alternating block anywhere in a lesson card.

1\. Open the lesson in the lesson editor.

2\. Place the cursor on an empty line inside a card.

3\. Type **/** to open the insert menu, then select **Alternating**.

The editor adds an Alternating block with 2 items. Each item starts with a placeholder heading and description.

> **Info:** **Note**: You can only insert Alternating inside a card. If the option is not available, check that your cursor is inside a card.

## Add content to an item

Each item accepts any kind of block content. You can add:

• headings and paragraphs

• images, videos, and other media

• code blocks

• nested layout blocks

To edit an item, select inside the content area and type or paste your content.

## Change the number of items

An Alternating block supports 2 to 10 items.

1\. Select the Alternating block.

2\. In the toolbar, find the cell counter.

3\. Select **+** to add an item at the end, or **−** to remove the last item.

CreateUpon renumbers the items and keeps the left-right alternation correct as you add or remove items.

> **Error:** **Note**: Removing an item deletes any content in that item. Move the content into another item first if you want to keep it.

## Format an Alternating block

The toolbar above a selected Alternating block offers more controls.

• **Layout type**: switch between Grid, Steps, Timeline, Alternating, and Cycle

• **Color**: set a color for all badges in the block

• **Constrain width**: limit the block to 800 pixels wide, or switch to **Full width** to fill the page

## See also

[

Layout & columns

Configure the column layout of your card

](https://docs.createupon.ai/en/articles/10494042-layout-and-columns.md)[

Layout block width

The Constrain width option controls how wide a layout block spans on the lesson page. You can set the width for each block, so different layouts in the same lesson can use different widths.

](https://docs.createupon.ai/en/articles/10494077-layout-block-width.md)
